White W480 Guía de usuario descargar pdf (Pagina 179)

Color misregistration

ABCDEABCDE

ABCDE

Color has shifted outside of the appropriate area or has been superimposed over another color area. Try the following:

1 Recalibrate the printer.

Perform Color Adjust from the Quality menu.

2 Remove and reinstall the photoconductor.

3 Adjust the color alignment. For more information, see “Adjusting the color alignment” on page 179.

Note: If you have not resolved the issue, then recalibrate again. If necessary, adjust the color alignment again.

Adjusting the color alignment

Make sure that the printer is turned off.

2 From the printer control panel, press and hold and the right arrow button while turning the printer on.

3 Release both buttons when the clock appears.

The printer performs its power‑on sequence, and then Config Menu appears.

4 Press the up or down arrow button until Color Alignment appears, and then press .

5 Press again to print the alignment page.

6 Press the up or down arrow button until Set A appears, and then press .

7 From the printed sheet, find the straightest of the 20 lines beside the letter A.

8 Press the left or right arrow button until that number is displayed, and then press .

Submitting selection appears.

9 Repeat steps 6 through 8 to align sets A through L.

10 Press .

11 Press .

12 Press the up or down arrow button until Exit Config Menu appears, and then press .

Resetting the Printer appears briefly, followed by a clock, and then Ready appears.

Troubleshooting 179

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 212 213

Sin comentarios

White W480 Guía de usuario Pagina 179